May be som one can help me I try to get inside file system bitpim don't recocnized my SXG75 at all (com port set on diagnostic) with QPST I can make screenshoots but when I try to go inside file system, software ask for SPC code - some ideas how to slove this problem and finaly let to inside
adfree
22.07.2006, 18:03
SPCode is an Securityproblem.
Solution A:
FW update with the russian 22 and customization update on.
Then the SPC is 000000 :mrgreen: :up:
Sorry, forgotten. Warning! U lost ur important Data (SMS, Pics...) if u choose customization update.
Solution B:
U search the SPC with QXDM from Qualcomm...
Bitpim works: :up:
But only with double click on the middle filesystem. Look here:
http://forum.modopo.com/showthread.php?t=12393
At the moment is no full support of EF81 and SXG75
DjiXas
22.07.2006, 20:39
http://forum.modopo.com/showthread.php?t=12393
Still not finds SXG75...
DjiXas
23.07.2006, 11:42
I get:
2:41:45.805 Error: Failed to open communications - Siemens DIAGNOSTIC Interface
Siemens DIAGNOSTIC Interface: could not open port: (2, 'CreateFile', 'The system cannot find the file specified.')
NVM, fixed
tomu
25.07.2006, 07:24
Hello,
my version is 22 with all slovian languge (russian 401) becouse Im curretntly in Ukraine and phone was buyed there, please tell me where I can find settings of customization update is in phone if yes where in menu looking for?
tomu
25.07.2006, 20:02
SO GUYS VICTORY !!!!!!!!!!!
With BITPIM this what is writen under link basicly is true just with one small think I push right mouse button on file " \ " and in option I pushed Refresh file system and it works well.
So thanks a lot for help
herry potter
16.08.2006, 13:00
I have installed BitPIM on my PC and connect DCA-540 to SXG75.
Start BitPIM, but always no telephone connected.
Please help.
MINIMALIST
16.08.2006, 14:28
U have to install MPM on your Windows first. It contains the USB cable drivers.
Then in BitPim there is no automatic connection to SGX75 or EF81 possible. Everybody has to go to settings menu, select "other CDMA phone" and then browse the available ports. Select the listing with "Siemens diagnostic" or the like. It's always the second Siemens driver in the list.
Then you can use the file explorer according to the howtos you are reading. Please be sure to doubleclick on the folder symbol to start the filesystem reading process.
Write soon if you were successful or not!
herry potter
17.08.2006, 01:59
Thanks MINIMALIST for your answer. But still No Phone Detected/Recognized.
MPM, ofcourse I installed it first and every features (Mobile Phone Manager, Phone Explorer, Mobile Modem Assistant and Smart Sync) runs well.
Other CDMA Phone and Siemens Diagnostic Interface have been selected.
What do you mean "doubleclick on the folder symbol to start the filesystem reading process".
adfree
17.08.2006, 02:08
Left side:
U must see at "bottom" Filesystem over LOG.
If not? Go to View->View Filesystem.
Then an blue Folder Icon is visible at top in the middle.
Simple Doubleclick.
No other way! Not Full Support at this time...
Regards
herry potter
17.08.2006, 02:24
At first I can not see sub folder "Filesystem" above "LOG".
Then I go to View/View Filesystem, click it and YES! blue folder come out in the Middle column.
I do double-click and BitPIM start "Reading Phone File System".
Now everything runs successfully.
Thanks Adfree.
erwinpiero
07.05.2007, 10:14
Finally got connected with BitPim, although I succeeded with BMC. Just curious, and someone told me how I must do.