Got a problem with a brand new DCA-510 USB cable and the Mobile Phone Manager combination. Every time I connect my S65 and start MPM the whole PC freezes and I can only reset it to restart it. I've tried 3 versions of MPM with the same result. (I used to use MPM with a serial cable and it always worked fine.)
I've tried SiMoCo as well. Using that it simply will not connect to the phone. Is there another software to try?
I successfully updated the S65 to SW58 with the same cable and com port settings so the cable should be faultless I guess.
Can anyone help me? I just want to use DCA-510 to transfer data between the PC and the S65.
acetm
23.03.2007, 15:03
Got a problem with a brand new DCA-510 USB cable and the Mobile Phone Manager combination. Every time I connect my S65 and start MPM the whole PC freezes and I can only reset it to restart it. I've tried 3 versions of MPM with the same result. (I used to use MPM with a serial cable and it always worked fine.)
I've tried SiMoCo as well. Using that it simply will not connect to the phone. Is there another software to try?
I successfully updated the S65 to SW58 with the same cable and com port settings so the cable should be faultless I guess.
Can anyone help me? I just want to use DCA-510 to transfer data between the PC and the S65.
Hát én a Simocot ajánlanám. Én azt használom, mivel az Mpm nem volt képes lekezelni a bluetooth-t. Több embernek is odaadtam pár ezt a programot, nekik működött kábellel is, szóval beállítással lesz ott a gond. Van olyan gomb, ami megkeresi neked a telefont, azt próbáltad?
Thoni62
23.03.2007, 15:11
@ zoltank8
Hey,
connect the DCA 510 with the mobile telephone and # *06* then enters.
Then click on "more information" and you then see whether a connection with the mobile telephone is made.
So long
Thoni62 :cool:
Keyser Soze
23.03.2007, 15:16
Hát én a Simocot ajánlanám. Én azt használom, mivel az Mpm nem volt képes lekezelni a bluetooth-t. Több embernek is odaadtam pár ezt a programot, nekik működött kábellel is, szóval beállítással lesz ott a gond. Van olyan gomb, ami megkeresi neked a telefont, azt próbáltad?Please use only english language in this forum. If you want to talk to zoltank8 in your native language, please do it via PM.
acetm
23.03.2007, 17:57
Please use only english language in this forum. If you want to talk to zoltank8 in your native language, please do it via PM.
Ok, sorry. :roll:
zoltank8
23.03.2007, 18:28
Thanks. I tried but I do not know where the connection is to be seen. Maybe I cannot find it because it does not exist....
@ zoltank8
Hey,
connect the DCA 510 with the mobile telephone and # *06* then enters.
Then click on "more information" and you then see whether a connection with the mobile telephone is made.
So long
Thoni62 :cool:
zoltank8
23.03.2007, 18:36
Another strange thing....I tried SiMoCo again....and the phone got turned off....while the cable is connected to the phone it won't turn back on....if I unplug the cable it can be turned back on....